Macintosh Installation
Requirements
—
OS 10.6 or later
—
One open USB Port (additional ports for each additional device)
—
USB Compatible software.
Notes
—
The Cirrus and Professional pedals do not require any driver.
PFC USB Rudder Pedals Macintosh Calibration
1. Turn on you Macintosh.
2. Plug in USB cable from pedals.
3. Macintosh will register the pedals automatically.
4. Start your simulation software such as X-Plane.
5. Assign and calibrate the pedals in the simulation software.
FS2004 Specific Settings
1. From the main Flight Simulator 2004 splash screen, choose the
Settings
option, you can find this in the bottom left hand corner of the screen.
2. Once in the settings page, click on the
Assignments
button, this will take you
to the
Controls - Assignments
screen.
3. On the controls assignments screen click on the
Joystick Axes
tab.
4. Next click on the drop arrow called
Joystick Type
. The drop-menu list, choose
PFC USB Pedals 2
.
5. Next, in the Assignment List in the middle of the page, scroll down until you
find the entry on the left, that says
Left Brake Axis
.
6. Double click on the left brake axis to open the
Change Assignment
window.
7. Apply
Left Brake
on the pedals and you should see
X-Axis
then click on OK.
8. Back in the Assignment List, scroll down until you find entry for
Right Brake
Axis
.
9. Double click on the right brake axis to open the
Change Assignment
window.
10. Apply
Right
Brake
on the pedals and you should see
Y-Axis
then click on OK.
11. Back in the Assignment List, scroll down until you find entry for
Rudder Axis
.
12. Double click on the rudder axis to open the
Change Assignment
window.
13. Apply full left or right rudder on the pedals and you should see
Rudder Axis
then click on OK.
continued on page 6
5
