PDW30 Point-to-Point Wireless Bridge Instruction Manual
27
Factory Defaults & User Settings
The following table shows the factory setting for most of the programmable parameters on the device.
Next to the factory setting, the user may record the new setting for the particular application.
Model: ___________________ S/N: __________________ Date: _______________
Primary
Parameter
Default Setting
User Setting
ANALOG INPUT
4-20mA
DIGITAL I/O #1
INPUT
DIGITAL I/O #2
INPUT
DIGITAL I/O #3
INPUT
DIGITAL I/O #4
INPUT
NETWORK ID
01
MODBUS TIMEOUT
1 SEC
MODBUS BAUD RATE
9.6K
DATA FORMAT
8E1
PASSWORD
0000
Secondary
Parameter
Default Setting
User Setting
NETWORK ID
01
ANALOG INPUT
4-20mA
MODBUS TIMEOUT
0.2 SEC
PASSWORD
0000
