PD154 & PD158 Vigilante II Annunciators
Instruction Manual
9
Dimensions
All units: inches [mm]
3.61"
(92mm)
2.50"
(64mm)
4.68"
(119mm)
Figure 3. Case Dimensions – Side View
1.76"
(45mm)
0.59"
(15mm)
3.2"
(81mm)
2.45"
(62mm)
3.6"
(91mm)
Figure 4. Case Dimensions – Top View
Connections
All connections are made to removable screw
terminal connectors located at the rear of the
instrument.
•
Use copper wire with 60°C or 60/75°C insulation
for all line voltage connections.
•
Observe all safety regulations.
•
Electrical wiring should be performed in
accordance with all applicable national, state,
and local codes to prevent damage to the
instrument and ensure personnel safety.
Connector Labeling
The connectors label, affixed to the instrument, shows
the location of all connectors available with requested
configuration.
Figure 5. Connector Labeling for PD154-6R2-1
Figure 6. Connector Labeling for PD158-6R2-1
Figure 7. Connector Labeling for PD154-7R2-0
Figure 8. Connector Labeling for PD158-7R2-0