Precision Digital Corporation Helios PD2-6363, Инструкция по эксплуатации

Страница: 22 / 60

Helios PD2-6363 Dual Pulse Input Rate/Totalizer
Instruction Manual
22
Analog Output Transmitter Power
Supply
The internal 24 VDC power supply powering the
analog output may be used to power other devices, if
the analog output is not used. The I+ terminal is the
+24 V and the R terminal is the return.
Figure 29. Analog Output Supply Powering Other
Devices
Remote Operation of Meter
The meter can be operated via the programming
buttons or a PDA2364-MRUE remote control station
using the digital inputs and outputs connections as
illustrated in
Figure 30. Meter to PDA2364-MRUE
Control Station Connection .
Figure 30. Meter to PDA2364-MRUE Control
Station Connection
Interlock Relay Feature
As the name implies, the interlock relay feature
reassigns one, or more, alarm/control relays for use
as interlock relay(s). Interlock contact(s) are wired to
digital input(s) and activate the interlock relay. This
feature is enabled by configuring the relay, and the
corresponding digital input(s), see
Setting Up the
Interlock Relay (Force On) Feature on page 44 .
In the example below, an Interlock Contact switch is
connected to a digital input, which will be used to
force on (energize) the Interlock Relay. The Interlock
Relay and the Control Relay are connected in series
with the load.
•
When the Interlock Contact is closed (safe), the
Interlock Relay energizes, allowing power to flow
to the Control Relay; the corresponding front
panel LED is on.
•
When the Interlock Contact is open, the
corresponding front panel LED flashes (locked
out), the Interlock Relay is de-energized,
preventing power from flowing to the Control
Relay and the load.
Figure 31. Interlock Connections
R I- I+
1 3 2
24 VDC
Powered
Device
24 V
+ -