Model No. TT-2500
Page3of8
Feb 2010
USE AND CARE INSTRUCTIONS – IMPORTANT SAFEGUARDS
1.
DO NOT
block the air-intake panel, as this may overheat the unit.
2.
We recommend pans to be in the range of 12~26cm in diameter. Please refer to the next page for a list
of suitable and unsuitable pans.
3.
DO NOT
touch the hot surface of the ceramic plate. NOTE: The induction unit itself does not produce
any live heat during cooking, however, the heat reflected from the pan will leave the surface of the
ceramic hot!
4.
DO NOT
cook with empty pots or pans. Heating an empty pan will automatically activate the
overheating protection device and the unit will shut off.
5.
Place the induction unit on a flat & even surface and at least 10cm away from the wall and other objects
for proper ventilation
.
6.
DO NOT
place any objects or tools in the air-intake panel. Doing so may cause electrical shock.
7.
To protect against electrical shock,
DO NOT
immerse the unit, the cord or the plug in or near water or
other liquids.
8.
Close supervision is necessary when the induction unit is used or near children.
9.
DO NOT
operate the induction unit if it has been damaged in any manner or if the unit malfunctions.
Return the unit to the nearest authorized service facility for examination or repair.
10. The use of any accessories or parts not recommended by the manufacturer may cause injuries.
11. Keep the power cord away from heat.
12.
DO NOT
place the induction unit in, on, or near open flames, electric burners, heated ovens or other
high temperature surroundings.
13.
DO NOT
heat any sealed cans on the induction unit. A heated can may explode.
14.
DO NOT
move the induction unit while cooking or when the pan is hot.
15. After the induction unit has cooled down, unplug the cord and clean as follows,
CERAMIC PLATE: wipe with damp cloth or use a mild, non-abrasive cleaning solution.
BODY: wipe the control panel with soft cloth or use a mild cleaner.
16.
DO NOT
use induction unit for other than intended use.
17. Unplug when not in use.
18. When
storing,
DO NOT
place any objects on top of the induction unit.
SAVE THESE INSTRUCTIONS!!!
