PreCise 002-00177, Руководство пользователя

Страница: 9 / 36

9
To mount the Precise SHP Display Module–
1. Remove the Display Module docking stand from the kit.
2. Identify a flat surface where you will place the docking
stand that is easy to reach but out of the path where
you access other instruments and materials.
3. Place the Display Module into the remote mount
holder.
4. Charge the Display Module (see Section 2.5).
An advantage of the iPod touch Display Module is that it
can be easily replaced if the original Display Module is
ever damaged. Simply call CAO’s Customer Care team
(877.236.4408) to order a new unit
NOTE: If a solid metal surface is between the Display
and Base, the Display may have difficulty
communicating with the Base. If this occurs,
reposition the Display so there are less items or
surfaces between it and the Base.
2.5.3. Setup for Countertop Use
The Precise
SHP may be used as a countertop unit Identify
a secure location for the Base Module. Make sure there
is adequate space around the unit for quick access to the
power cord, remoter interlock (if used), and the docking
area. Place the Display Module in the docking area on the
Base Module.
1. Connect the power supply unit by plugging into the
adapter on the back of the Base Module. Connect the
power cord to the power supply unit and plug into an
outlet.
2. Attach the Remote Interlock connector if the operatory
is equipped with a Remote Interlock (see Section 2.10).
3. If desired, the mounting bracket (sold separately) may
also serve as a handle for the Base Module to facilitate
carrying the Precise SHP between operatories. Simply
slide the Base into the mounting bracket and secure the
ends of the bracket to the bottom of the Base using the
two thumb screws provided.
2.6. Charging the Display Module
In the upper right portion of the Display Module, the battery
status of the Display Module is indicated. When the battery
is low, the Display Module needs to be charged. This can
be done by placing the Display Module in the dock in the
front of the Base unit, or by attaching the charging cable to
the bottom of the Display Module and plugging the cable
into the charging port on the front of the base module.
The Display Module will not charge if the base module is
turned on.
2.7. Synchronizing (Wireless
Communication)
The Precise SHP system is designed so that only one iPod
touch can communicate or control one Base Module at any
given time. This helps to ensure that another iPod touch
or other wireless device in the surrounding area does not
inadvertently activate the Base Module. The connection
between an iPod touch and Base is made by synchronizing
the two to each other. When you receive your Precise
SHP kit, the iPod touch included with that kit needs to be
synchronized with the Base. If you have received a new
iPod touch for use with the Base, it will be necessary to
perform the synchronize function. Review Section 2.4.1.2
of the manual for detailed instructions on synchronizing the
iPod touch to the Base.
The Precise SHP utilizes the Bluetooth RF communications
available in the iPod touch® to communicate with the
Base Module. This technology provides for what is known
Figure 2.6. Slide the Display into the Docking Well
Figure 2.7. Connect charging
cable to USB port.
Figure 2.8. Connect charging
cable to Display
charging the displa
y
Figure 2.4. Table top
configuration.
Figure 2.5. Mounted in
handpiece rack.