Precise Time and Frequency ptf 1226, Руководство по эксплуатации и обслуживанию

Страница: 21 / 36

5.3. SNMP Agent
5.3.1. General
The Auto switch/Distribution unit includes an SNMP agent
(SNMPv1) using the standard UDP interface and providing basic
information on the unit (location, capabilities etc.) together with
traps on alarm conditions that are sent to the address set as the
SNMP manager IP address.
5.3.2. SNMP Queries and Traps
SNMP traps are available to provide summary event information to
the SNMP manager. Specific traps available are;
Trap#1
Channel Mode Change (Auto/Manual)
Trap#2 Channel Input Change (Primary/Backup)
Trap#3 Channel Primary Input Status (Fault/Okay)
Trap#4 Channel Backup Input Status(Fault/Okay)
Trap#5 Input Status Change (Fault/Okay)
Trap#6 Output Status Change (Fault/Okay)
Trap#7 Auxiliary Input Status Change (High/Low)
Traps can be enabled or disabled from either the telnet or the serial
Monitor/Control interface, or the SNMP interface.
Screen shots of the SNMP Query screen and trap ringer console after initiating a
number of “trap” events, are shown below;