Precidia ipocket232 Скачать руководство пользователя страница 94

Страница: 94 / 106

iPocket

232

User Guide

Appendix F: MCC

23-CML000293

iPocket232 Inc.

F-2

OTE

If any characters arrive from the DTE while the modem is executing a

command, such as ATA or ATD, that command is aborted.

Supported AT Commands

The iPocket232 supports a subset of the standard Hayes command set, and a

selection of extended commands, including the ability to initiate and perform FTP
and HTTP transfers (see page F-10).

OTE

You can test the iPocket232 modem, when not in configuration mode, by

typing AT commands in your terminal software (HyperTerminal, Procomm Plus).

OTE

Only the options listed under Parameters are valid. Any unsupported

standard command options return an OK result. Any unsupported non-standard
commands return an error result. Options not required are ignored.

The following two tables describe the supported standard AT commands and the

extended AT& and AT+ commands:

Содержание ipocket232











































































































Результаты поиска

Содержание ipocket232

Отзывы:

Precidia ipocket232, Руководство пользователя, Страница: 94 / 106

Результаты поиска

Содержание ipocket232

Отзывы: