Prebena KTVH-B19D, Руководство пользователя

Страница: 90 / 202

Faults
40
Faults
WARNING
When operating a damaged or faulty stapler
unit serious or fatal injuries may occur.

Disconnect the stapler unit immediately
from the compressed air supply in case of
fault (see page 33).

Empty the magazine (see page 33).

Use the stapler unit only when the problem
is resolved.
ATTENTION
The stapler unit can be damaged by unauthorized people during
repairs.

Make sure that repairs to the stapler unit are only performed
by the manufacturer.
Remove jammed fasteners
To remove a jammed fastener, proceed as follows:

Disconnect the stapler unit from the compressed air supply (see
page 33).

Empty the magazine (see page 33).

Pull back the pusher and snap it on.

Loosen the jam in the device with a thin pair of pliers or a
screwdriver

Move the pusher again carefully into position.

Remove the jammed or deformed fasteners.

Connect the compressed air supply (see page 17).

Fill the magazine as described on page 20.

Check the functioning of the stapler unit (see page 24).
If you cannot eliminate the fault, contact your dealer or the
manufacturer (see page 48).