Prebena 1GP-A16, Руководство по эксплуатации

Страница: 55 / 226

Preparing the tacker
18

Ensure that the lower pusher (7) engages at the lock (4).

Push the lock (4) forwards if necessary.
The magazine is closed.
Checking function
To check correct operation of the tacker, proceed as follows:
CAUTION

Observe the danger notes in the chapter on 'Safety' from page
7 ff.

Set the tool lug of the tacker on a piece of wood with a minimum
thickness of 20 mm.

Trigger the tacker (see chapter "Triggering device" on page 21).

Check the following properties:
-
Every time the device is triggered, a fastener must be driven
into the piece of wood.
-
To achieve the desired driving depth, alter the operating
pressure of the compressor (see page 15).

Repeat these steps if necessary.
The tacker is not ready for operation.