Pratt & Whitney Canada PT6A Turboprop Скачать руководство пользователя | Manualshive

Страница: 31 / 48

background image

30

30

30

Atmospheric pollutants may contaminate the engine gas path, leading to
a build up of deposits on airfoils, the initiation of corrosion, sulphidation
or performance deterioration. These effects can be alleviated with engine
washing. Internal engine washes are done while motoring the engine at
10-25% Ng speed for a thorough cleaning.

Compressor Desalination Wash

Used to remove salt deposits which can cause corrosion, however light
dirt deposits may also be removed. Wash fluid is drinking quality water,
provided minimum standards are met. Water is injected into the engine
intake using either an installed compressor wash ring or a hand held
wash wand.

Compressor Turbine Desalination Wash

Used to remove salt deposits from the compressor turbine blades and
stator which can cause sulphidation, a reaction between the salt and
sulphur from the fuel. This wash must be done immediately following a
compressor desalination or performance recovery wash as contaminants
will be transferred from the compressor to the hot section during a
compressor desalination or performance recovery wash. Wash fluid is
drinking quality water, provided minimum standards are met. Water is
injected through a wash tube inserted through one of the ignitor ports.

Compressor Performance Recovery Wash

Used to remove more stubborn deposits which cannot be removed during
normal desalination washes. Wash fluid includes an approved detergent.
This wash should only be done when engine performance loss is noticeable
or trend monitoring dictates. Wash fluid is injected into the engine intake
using either an installed compressor wash ring or a hand held wash wand.
A water rinse of both the compressor and compressor turbine is required
following the detergent wash.

engine wAshing

Atmospheric pollutants may contaminate the engine gas path, leading to
a build up of deposits on airfoils, the initiation of corrosion, sulphidation
or performance deterioration. These effects can be alleviated with engine
washing. Internal engine washes are done while motoring the engine at
10-25% Ng speed for a thorough cleaning.

Compressor Desalination Wash

Used to remove salt deposits which can cause corrosion, however light
dirt deposits may also be removed. Wash fluid is drinking quality water,
provided minimum standards are met. Water is injected into the engine
intake using either an installed compressor wash ring or a hand held
wash wand.

Compressor Turbine Desalination Wash

Used to remove salt deposits from the compressor turbine blades and
stator which can cause sulphidation, a reaction between the salt and
sulphur from the fuel. This wash must be done immediately following a
compressor desalination or performance recovery wash as contaminants
will be transferred from the compressor to the hot section during a
compressor desalination or performance recovery wash. Wash fluid is
drinking quality water, provided minimum standards are met. Water is
injected through a wash tube inserted through one of the ignitor ports.

Compressor Performance Recovery Wash

Used to remove more stubborn deposits which cannot be removed during
normal desalination washes. Wash fluid includes an approved detergent.
This wash should only be done when engine performance loss is noticeable
or trend monitoring dictates. Wash fluid is injected into the engine intake
using either an installed compressor wash ring or a hand held wash wand.
A water rinse of both the compressor and compressor turbine is required
following the detergent wash.

engine wAshing

«
...
29
30
31
32
33
...
»

Содержание PT6A Turboprop

















































Отзывы:

Нет отзывов

Похожие инструкции для PT6A Turboprop

Бренд: Rail King Страницы: 46

RailKing RKS SD70ACE

Бренд: M.T.H. Страницы: 12

Бренд: Kohler Страницы: 116

Бренд: Perkins Страницы: 88

Бренд: Teryair Страницы: 13

Бренд: YS Страницы: 2

Бренд: New Holland Страницы: 150

Бренд: ZIEHL-ABEGG Страницы: 17

Бренд: LinMot Страницы: 30

Бренд: Hirth Страницы: 21

EMF SQML160 Series

Бренд: EMF Motor Страницы: 43

Бренд: Associated Electrics Страницы: 4

Бренд: Mitsubishi Страницы: 204

Бренд: MINN KOTA Страницы: 13

Бренд: Vari Страницы: 22

116 - V1.1 ASSEMBLY EXHAUSTS 3207I-3208I-3210

Бренд: MVVS Страницы: 1

Бренд: Ebmpapst Страницы: 12

COURAGE SV710-740

Бренд: Kohler Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды