2.2
CONNECTION BETWEEN TWO CLEAN OUTPUT CONTACTS
The following connection lets you control a NO contact via radio and/or wire.
WARNING: Multiple buttons can be connected to the same input by using parallel cabling.
N
L
P1
OUT1
C
1
P2
1
2
3
4
5
6
7
2.1
CONNECTIONS FOR LOADS POWERED BY THE GRID (230 V MAX 500 W, 110V MAX 250 W)
The following connection lets you control the loads, powered by grid voltage, via radio and/or wire.
This control unit comes set up for different types of connection that allow greater flexibility regarding the behaviour of the
outputs and the types of inputs to adapt to various system configurations.
BEHAVIOUR OF OUTPUTS
Depending on the type of load that you want to control, connections can be made that let you
- control a load powered by grid voltage (230 V max 1000 W, 110 V max 500 W), paragraph 2.1.
- have two potential-free output contacts; paragraph 2.2.
INPUT TYPE
Thanks to the programming described in paragraphs 4.3 and 4.4, you can select whether the wired command is given by a
button or a switch.
WARNING: More loads can be connected by using parallel cabling.
Multiple buttons can be connected to the same input by using parallel cabling
P1: Command of load
P2: Presence simulator activation
P1: Command of load
P2: Presence simulator activation
2 ELECTRICAL CONNECTIONS
N
L
Fig.2.1
Fig.2.2
P1
OUT1
P2
1
2
3
4
5
6
7
