manualshive.com logo in svg

prana Air Cleaner PRO, Руководство пользователя

Поделиться
Скачать
prana Air Cleaner PRO Скачать руководство пользователя страница 24

24

ERROR DESCRIPTION AND TROUBLESHOOTING

Common malfunctions, error code description, and troubleshooting method.

Cannot turn on power.
Pressed button has no response.

1. Is the power cord plugged in?
Plug in the power cord. 

2. Is the cleaner covered?
Close the front cover. 

3. Is the device placed vertically on the ground?
Place the device on a flat surface. 

4. Is the device in Child lock mode?
When “Child lock” appears on the display, hold the lock/reset button for 5 seconds 

to turn the child lock off.

The air is dirty, but the air pollution indicator is green.
The air pollution indicator remains red even when running continuously.

1. Is the cleaner in a place that cannot easily absorb the dirty air (dust)?
Move it somewhere else.

2. Is the particulate sensor dirty?
Clean the particulate sensor.

Is there a banging or chirping sound while running?
Is there too much dust on the anion producer?

Clean the anion producer.

The smell of the supply vent is unpleasant?

1. Is the filter dirty?
Clean the filter.

2. Has the filter not been replaced in a long time? Replace the filter.

Содержание Air Cleaner PRO





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды