Pramac ES5500X 5.5 KW, Дополнительная инструкция, Страница: 4 / 17

Pramac Industries SERVICE BULLETIN TSB1001
Page 2 of 3
7. Connect the white connector of the new harness to the white connector in the alternator
noting that the wire colors of the new harness correspond to those on the alternator.
8. Connect the green wire with the ring terminal on the end to the same ground position in the
alternator as the previous harness using the same screw.
9. In the control panel, connect the Green wire from the harness to the position on the
connector block opposite the green wire.
10. Connect the Brown wire of the harness to the position on the connector block opposite the
white wire which connects directly to one of the receptacles.
11. Connect the Blue wire of the harness to the position on the connector block opposite the
black wire which connects directly to one of the receptacles.
12. Connect the White wire of the harness to the position on the connector block opposite the
white wire which connects directly to one of the circuit breakers.
13. Connect the Black wire of the harness to the position on the connector block opposite the
black wire which connects directly to one of the circuit breakers.
14. Reinstall the control panel and the alternator end cap.
15. Make certain that all circuit breakers are re-set by pushing the black buttons on the front of
the control panel. Note that these buttons may be hidden by weather boots.
Elec. Diagram
–
Control Panel
Figure 1. Alternator Figure 2. Control Panel