Page
|
6
Issued by technical department Prakash pump
Copyright - 2016
2.
SAFTEY INSTRUCTIONS
2.1 General information
Before performing any actions detailed within this instruction, the Site Health and Safety instructions
must read and fully understood.
Whenever the equipment is operated, maintained or used in anyway, the procedures detailed within
the Health and Safety Dossier (DHS) and any procedures detailed within these instructions shall be
followed.
The pump supplied has been designed with safety in mind, where as hazards cannot be eliminated;
the risk has been minimized by the use of guards and other design features. Some hazards cannot be
guarded against and the instructions below MUST BE COMPLIED WITH for safe operation. These
instructions cannot cover all circumstances. It is the responsibility of the user of the equipment for
maintaining safe working practices at all times.
Before starting work, become familiar with the control devices and their functions.
Do not subject the equipment to work, it could not be a reasonably support.
Access to the equipment should be restricted to the personnel responsible for installation,
operation and maintenance and they must be trained, only authorize and skilled labor from
Prakash service center should handle their respective tasks.
The plates concerning safety must be very clear.
Handel the motor pumps carefully.
When handling the motor pump use suitable lifting equipment with safety regulation and
wear safety shoes and gloves.
Use suitable cables of allowable length, marked with suitable cross-sections.
Protect the cable from high temperatures, lubricants and sharp corners, as this may result in
puncture of cables and case damage to the equipment and life.
Never run the set dry as it may reduce the life of the equipment or damage.
During the installation operations, pay attention to hanging loads and follow the
corresponding safety rules.
Make sure the control panel and the electrical system in accordance with current regulation.
Do not tamper to remove the pump’s guards.
Operation of the equipment for the application other than for which it is supplied can
increase the risk from hazards. Please consult Prakash pump skilled engineer before making
such change in the application of the equipment.
Improper installation, operation and maintenance of the product supplied could result in
injury or death.
Within the manual, safety instructions are marked with safety symbols.
