praher aquastar comfort 3000, Руководство пользователя

Страница: 6 / 25

6 www.praher.com
•
Do not put the equipment into operation immediately if it has been taken from a cold to a
warm area. The thereby developing condensation water could destroy your equipment
•
If the equipment has visible damages, does not work anymore or has been stored under
adverse conditions for longer periods, then it is to be expected that a safe operation is no
more possible. In this case the equipment is to be secured against unintentional start-up and
if necessary to be decommissioned.
•
Live parts can be uncovered when opening the cover or removing parts. Before an
alignment, maintenance, a repair or change of parts or devices, the equipment must be
separated from all voltage supplies, if opening the equipment is necessary. If after that an
alignment, maintenance or a repair on the opened equipment under voltage is inevitable, it
may only be done by experienced, skilled staff, which has knowledge of the associated
dangers and/or the relevant regulations.
•
Capacitors in the equipment can still be charged, even if the equipment is separated from all
voltage supplies.
•
Assembly and/or disassembly of the valve only in a pressure-free status (i.e. empty piping
beforehand)
•
Valve flow and/or direction of flow must be considered.
6. Residual Risk
6.1 Hazard generated by current
Manipulation of the Aquastar by operating staff is strictly prohibited and may only
be performed by duly authorized staff, qualified for electrical work. Compliance
with the corresponding instruction and prohibition signs is required.
6.2 Hazard generated by human error
The operating staff must be instructed in regard to the residual danger resulting
from electricity and familiarized with correct operation. Efficiency of the safety
training must be verified.
6.3 Hazard generated by current during cleaning work
Cleaning of the Aquastar may only be performed after disconnection from power
supply (lever switch).
7. General
PRAHER Aquastar controls are significant technical products, which are manufactured with high
accuracy to the most modern technical production methods. Entitled complaints will naturally be
rectified as fast as possible if they occur. The equipment has a warranty after valid European
law. The warranty begins with the purchase date.
Each person involved in the operation and maintenance of the equipment must have
read and understood the present operation manual!
This is for your own safety!
Attention! For relief of the sealing system the valve is shipped on intermediate position
and is not sealed! Prior to operation it has to be electrically set to position “Filter“!