Remote setup
The tuner allows for one of two different IR code sets to be selected by a jumper set-
ting (see jumper settings page for details.)
If the first (default) code set is selected, there is no setup required on the remote, be-
cause the channel control commands use the default settings (TV mode, code=000).
If the second code set is selected, then the remote needs to be setup in "Cable" mode,
code = 029. To do this, press and hold the "Code Search" button until the red LED
stays lit. Then, press the "Cable" button to select the mode. Then enter in the code
value, 029, by pressing those three digits on the numeric keys. After the third digit,
the LED turns off and the remote returns to the operational mode.
If the user desires to control the tuner using a learning remote, such as the Marantz
RC-2000 or similar, then follow that remote's instructions to transfer the control
codes from the RCA remote to the learning remote.
Page 5
CATV Tuner User's Manual
