6
5909V101-IN
Application
Loop Link 5909 is a USB communications interface for configuration
and monitoring of PR electronics’ PC-programmable devices. The USB
communication is supported by the Windows
®
versions 98SE, ME, 2000, XP,
Vista and Windows
®
7. PR devices available in the configuration program
PReset ver. 5.0 or higher, can be programmed by way of Loop Link 5909.
Technical characteristics
The PC program CD
PReset ver. 5.0 or higher contains the necessary
(unsigned) USB drivers. Loop Link 5909 is supplied from the USB port of the
PC. If you want to conserve power on a laptop, the USB connector of the
5909 can be connected to an externally supplied hub. The communications
connector on the PR devices is galvanically isolated from the USB connection
on the PC.
Installation
System requirements
Windows
®
98SE, ME, 2000, XP, Vista and Windows
®
7 with the following
recommendations:
Memory:
16 MB
Display resolution: 800 x 600
Hard disk space:
12 MB
N.B.: Loop Link 5909 devices with serial no. <059999999 are NOT compatible
with Windows
®
Vista and Windows
®
7.
Installation of PReset
The USB communications interface Loop Link
5909 must not be connected to
the USB port of the PC until after installation of the PReset program.
PReset will be installed on your hard disk and the registry will be updated with
all necessary information on the program. A PReset icon will automatically be
placed on the desk top.
1. Insert the CD-ROM in the CD-ROM drive and the dialogue
”InstallShield Wizard PReset - INSTALL” will start automatically.
2. When the installation program has been started, on-screen
guidelines will guide you through the rest of the installation.
3. If AutoRun is disabled in Windows
®
98SE, ME, 2000, XP and vista,
click the ”Start” button, select [Run] and start the installation
program ”CD drive:\PResetWin\setup.exe”.
Installation of USB drivers for Windows
®
98SE, ME and XP
Install the USB drivers while the PReset CD is still in the drive, i.e. immediately
after the PReset installation. Please note that you need to install two USB
drivers.
CONTENTS
