2/24
INDEX
SAFE USAGE OF THE PROJECTOR
3
INSTALLING THE PROJECTOR
4
FITTING THE LAMP
4
POWER SUPPLY – MAINS
5
CONTROL CONNECTIONS
5
DMX TERMINATOR
6
SETUP OPTIONS-PROJECTOR CONFIGURATION
6
TO SET THE DMX START ADDRESS
6
OPERATION MENU
8
ERROR MESSAGES
11
REPLACING GOBOS
11
DMX PROTOCOL
13
LED INDICATION
16
MAINTENANCE
16
LUBRICATION
16
KEEPING THE PROJECTOR CLEAN
16
TROUBLESHOOTING
17
TECHNICAL DATA
19
ELECTRICAL DIAGRAM
20
COMPONENT ORDER CODES
23
Please note that as part of our ongoing commitment to continuous product development, specifications are subject to change without
notice. Whilst every care is taken in the preparation of this manual we reserve the right to change specifications in the course of
product improvement. The publishers cannot be held responsible for the accuracy of the information herein, or any consequence
arising from them.
Every unit is tested completely and packed properly by the manufacturer. Please make sure the packing and / or the unit are in good
condition before installation and use. Should there be any damage caused by transportation, consult your dealer and do not use the
unit. Any damage caused by improper use will not be assumed by the manufacturer and / or dealer.
ACCESSORIES
These items are packed together with the projector:
Name Quantity
Unit Remark
G clamps
2
Pcs
XLR cable
1
Pc
5-pin plug
Safety cord
2
Pcs
Spare gobos
4
Pcs
This manual
1
Pc
Ω
clamps
2
Pcs
Options
