4/8
INSTALL THE PROJECTOR
How to use:
The product is mobile lighting device. Use on flat surface, not fit for use in high place. The product can be manually
rotated with angle from 0 degree of 90 degrees. Plastic head screws at both ends and rotate it till the angle desired,
then tighten the two screws.
There are two types of grille cover for avoidance of straight light for the client. It’s easy for its removal, loosen two
screws on one side of the light panel, remove the cover and tighten both screws.
The baffle door supplied can be used for advertisement and rotatable, unfasten the two plastic head screws at both
ends and move it till the angle desired, at last tighten them.
After installation, take out the Power Adaptor supplied with the product, plug the output end of the adaptor into the
input end of the product’s power cord. After powered on, the light panel will be on.
Note:
1.
Before use, please check if the screws at the both ends of the rotating axes are tightened.
2.
While use, DO NOT squeeze grille cover with great force or move it forcefully , otherwise it is deformed or broken .
