Features
.03.
• 1*200W COB LEDs (available for Warm White)
• 50,000 hours life span and low power consumption
• Color Rendering Index(CRI): Ra
≥
95
• Optimized high definition optical system for improved photometric performance
and field uniformity
• Projector-quality, high contrast aspheric lens
• Glass reflector that removes greater than 90% infrared radiation (heat) and reflects
greater than 95% of visible light
• Manual zoom system from 15°-38°
• Flat and even spot image
• Smooth manual focus system
• Beam edge continually adjustable hard-to-soft
• Housing made by rugged, die cast aluminum alloy
• Thermally insulated rear handle
• Thermally insulated knobs and single aluminum handle for installing
• 3 Metal spot cutting slots
• Barn door included
• Glass/Metal gobo slot as optional
• Color frame as optional
• Manual IRIS system as optional
• 0-100% Smooth and precise linear dimmer
• 25T/sec high speed shutter/strobe effect with variable speed
• Preset variable/random strobe and dimming pulse effect
• 1/3 DMX channels USITT DMX-512
• DMX512, master-slave, and sound control or auto operation
• 4-Button LCD display
• POWRECON connector IN/OUT
• Power switch available with fuse
• 3-Pin and 5-pin XLR connectors IN/OUT
• Low noise fan integrated with copper liquid cooling system
• -35-45°C Max ambient temperature
• IP20 protection rating
• 1*Safety attachment point
FEATURES & SPECIFICATIONS
3
Address setting
DMX setting
Auto run mode
Speed of auto run
Sound model
Dimmer
Current temperature
Set the temperature protect
Set the color temperature
Adjust temperature data
Normal / Inversion Display
Reset
a 0 0 1
a 5 1 2
d 0 0 1
d 5 1 2
S t A t
C 0 0
C 2 S
0
5
a t 0 1
a t 1 0
s p 0 1
s p 2 0
s o d 1
s o d 2
t E M P
0
t 0 4
t 1 2
0
0
u t 0 1
u t 1 1
C 0 0
C 2 S
0
5
D S
R E S T
P
.08.
DMX Output
3-Pin XLR Socket
DMX Input
3-Pin XLR Socket
1:Ground
2:Data(-)
3:Data(+)
1
2
3
1
2
3
1
2
3
1
2
3
COMMON
DMX+
DMX-
DMX512 IN
3-PIN XLR
DMX512 OUT
3-PIN XLR
2
1
For installations where the DMX cable has to run a long
distance or is in an electrically noisy environment, such as
in a discotheque, it is recommended to use a DMX
terminator. This helps in preventing corruption of the
digital control signal by electrical noise. The DMX
terminator is simply an XLR plug with a 120 Ω resistor
connected between pins 2 and 3,which is then plugged
into the output XLR socket of the last fixture in the chain.
Please see illustrations below.
1
2
3
PIN3
PIN2
120
Ω
MENU OPERATIONS
7
