PR Lighting AQUA MARINE 580 BWS, Руководство пользователя, Страница: 5 / 30

5
●
TROUBLESHOOTING
PROBLEM ACTION
The projector doesn’t switch on

Check the fuse on the power socket.

Check the lamp.
The lamp is on but the projector doesn’t respond
to the controller

Make sure that the fixture’s start address is right

Replace or repair the XLR signal cable.
The projector functions intermittently

Make sure the fan is working well or fans and their shields are not blocked
Beam appears dim, Low in brightness

Make sure the lamp is within its lifespan

Remove dust or grease from the lenses.
The project image appears to have a halo

Carefully clean the lamp, optical lenses and other components.
Heavily Defective Beam

Check if lens are in good condition(not cracked)

Clean dust or grease on the lens.
3. APPEARANCE
Rear Panel of the Base
Front Panel of the Base
1
2
3
4
5
6
7
8
9
10
11
1 2 3 4 5 6 7
1 2 3 4
1.
Front Lens
2.
Tilt Lock
3.
Chamber Cover
4. Fan Cover
5. Pan Lock
6.
Base
7.
Pan Latch
8.
Lower Head Cover
9.
Tilt Handle
10. Upper Head Cover
11. Front Lens Cover
1.Waterproof power socket
2.Waterproof fuse holder
3.Waterproof 5-pin XLR Socket(Male)
4.Waterproof 5-pin XLR Socket(Female)
5.Waterproof Ethernet Port
6.Waterproof DMX Wireless Receiver
7.Gore-Tex membrane
1. Return Key
2. UP Key
3. Down Key
4. Enter Key