10
●
MASTER/SLAVE MODE
Many projectors can run synchronously in the Master/Slave mode by linking them with each other. First,
connect the first fixture’s DMX output to the second fixture’s DMX input using XLR-XLR control cable and then connect the second
fixture’s DMX output to the third fixture’s DMX input, and so on until all projector are connected in this way. Eventually connect the
last fixture’s DMX output to a DMX terminator. Set 1
st
projector as the master and others are Slaves.
Start Addresses of all Slaves are 001; Operation mode of the Master can be set any mode for a Master’ and Slaves’ operation mode can
be set accordingly.
After Powered on, the group will run in Master/Slave Mode
6.
OPERATION MENU
1st LEVEL
2nd LEVEL
3rd LEVEL
4th LEVEL
5th LEVEL
Address
DMX Address
1-478
（
Short Mode
）
1-475
（
Standard Mode
）
1-459
（
Extended Mode
）
IP Address
Default IP Address
2.X.X.X /10.X.X.X
Custom IP Address
X.X.X.X
SubNet Mask
X.X.X.X
ArtNet
ArtNet Universe
0-255
sACN Universe
1-63999
Reset
Total Reset
Really Reset?
Confirm/ Cancel
Pan&Tilt Reset
Really Reset?
Confirm/ Cancel
Colour System Reset
Really Reset?
Confirm/ Cancel
Gobo Reset
Really Reset?
Confirm/ Cancel
Zo.Fo.Fr.Pr. Reset
Really Reset?
Confirm/ Cancel
Other Reset
Really Reset?
Confirm/ Cancel
Config Settings
DMX Channel Mode
Short Mode35CH
Standard Mode38CH
Extended Mode 54CH
View Selected Mode
Strobe
…..
Signal Select
XLR Only
XLR First
