2 4512V100-UK
Warning
To avoid the risk of electric shock and fire, the safety instructions of this guide must be observed and
the guidelines followed. The specifications must not be exceeded, and the device must only be applied
as described in the following.
Prior to the commissioning of the device, this installation guide must be examined carefully.
Only qualified personnel (technicians) should install this device.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
Repair of the device must be done by PR electronics A/S only.
Symbol identification
Triangle with an exclamation mark
: Read the manual before installation and commissioning of the
device in order to avoid incidents that could lead to personal injury or mechanical damage.
The CE mark
proves the compliance of the device with the essential requirements of the directives.
Ex devices
have been approved according to the ATEX directive for use in connection with installations
in explosive areas.
The product meets the requirements of the standards:
Factory Mutual Approval Standard Class Number 3611 and CSA C22.2 No. 213-16.
FM/CSA Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D.
The device has an internal, non-removable, rechargeable coin cell battery.
Do not attempt to open the back cover or remove the battery, as you may damage the device.
Safety instructions
Receipt and unpacking
Unpack the device without damaging it and check whether the device type corresponds to the one ordered.
Environment
The device is manufactured for indoor use. Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock, as
well as rain and heavy moisture. If necessary, heating in excess of the stated limits for ambient temperatures should be
avoided by way of ventilation.
The device may be used in Overvoltage Category II, Pollution Degree 2 at an altitude up to 2000 m.
If the equipment is installed within an ultimate enclosure, the inner service temperature of the enclosure corresponds to the
ambient temperature of the device.
If the device is operated in an ambient temperature b55ºC and +60ºC, the temperature of the device housing may be
higher than +60ºC. The device must therefore be installed so that it is only accessible to service personnel or users that are
aware of the reason for restricted access and the required safety measures at an ambient temperature of +55ºC to +60ºC.
Mounting
Only qualified technicians who are familiar with the technical terms, warnings, and instructions in this installation guide and
who are able to follow these should connect the device. Only devices which are undamaged and free of moist and dust may be
installed. The device may be installed on and supplied by PR electronics 4000 and 9000 series only.
GENERAL