Error codes, translation
A: 'Pneumatic System'
K: 'EEPROM'
B: 'Infrared Source'
L: 'Error CFG-Data'
C: 'Chopper Motor'
M: - not used -
D: 'Sensor Heater'
N: 'Sys.in.Conf.Mode'
E: 'Zero Setting'
O: 'USB-Stick Fault'
F: 'Err Factory Cal.'
P: 'No USB-Stick'
G: 'Secondary Signal'
Q: - not used
H: 'RTC'
R: 'Modem offline'
I: 'Cell Temperature'
S: 'Modem no service'
J: 'AD Converter'
T: 'Modem no antenna
If no error, error code is '0' (Zero)
Example of recorded values:
01.09.2010;13:45:07; 126,6 ; 0 ; 0 ; 963 ; 26,5;2;0;5888
01.09.2010;13:50:07; 0 ; 38,1 ; 0 ; 963 ; 26,5;2;0;5888
01.09.2010;13:55:07; 0 ; 0 ; 378,4 ; 963 ; 26,5;2;0;5888
07.09.2010;14:00:07;9999999; 0 ; 0 ; 963 ; 26,5;2;A;5888
In the example above the averaging time is five minutes and
instrument is cyclically measuring on all three points. The
atmospheric pressure is 963 mbar and the temperature inside the
instrument is 26.5°C. The instrument is measuring in mg/m
3
and on
the last record a pneumatic fault occured. The pneumatic fault was on
channel 1. The serial number of the instrument is 5888.
8.3.2 Readout and erasure of USB-Stick
Readout and erasure of the USB-Stick is performed using the USB-
interface on your computer. Please follow the instructions of the PC’s
manufacturer when performing such a job.
34
