10
PARAMETER LOCKING
For protecting the parameter values from unauthorized / accidental alterations, the parameter adjustments can be Locked.
The Operator Page is not affected by locking. The Figure 4.3 illustrates the steps for Locking.
For
Un-Locking
, repeat the sequence of steps shown in Figure 4.3 twice.
SETTING DEFAULT VALUES
The instrument is shipped from the factory with all the parameters set to their default values. Refer Figure 4.4 below for
regaining the factory default values.
User Manual
SCANEX PLUS
Figure 4.4
Default Page
Press PAGE
key to enter
Set-up Mode
Default Code
Use UP/DOWN
keys to set the
‘Default’ Code
Press ENTER key.
Scanner resets and restarts
with default parameter values
MAIN
Display
Mode
MAIN
Display
Mode
Figure 4.3
Default Page
Locking Code
Press PAGE
key to enter
Set-up mode
Use UP/DOWN
keys to set the
‘Locking’ Code
Press ENTER key
to Lock & Return to
MAIN
Mode
MAIN
Display
Mode
MAIN
Display
Mode
Desired Alarm
Type
Next Parameter
Press ENTER key
to store the value &
move to next Parameter