![background image](http://html1.mh-extra.com/html/ppe/lv-fx-series/lv-fx-series_instructions-manual_1592743002.webp)
LV-FX Series Venturi Loaders
8303 CORPORATE PARK DRIVE, MACEDONIA (Cleveland), OHIO 44056, USA
216-367-7000
•
Toll Free:
800-321-0562
•
Fax: 216-367-7022
•
Order Fax: 800-223-8305
6385 Montessouri Street, Las Vegas, Nevada 89113
702-433-6385
•
800-258-8877
•
Fax: 702-433-6388
11218 Challenger Avenue, Odessa, Florida 33556
727-834-8888
•
800-282-6783
•
Fax: 727-834-8873
Toll Free: USA, Canada & Mexico
800-362-0706
P
LASTIC
P
ROCESS
E
QUIPMENT,
INC.
PPE
www.ppe.com
•
e-mail: [email protected]
PPE
W E S T
PPE
S O U T H
KNOW YOUR WARNING SIGNS AND SYMBOLS!
This instruction manual and our products may use the following signal words Caution and/or Danger
symbols to call attention to the degree or level of possible hazard seriousness. Pay attention to them!
1.
CAUTION:
A warning to indicate a potentially hazardous situation which, if ignored, may result in
personal injury or threat of health. Also used to alert against unsafe practices which could cause
property damage or accidents. See labels B & BB.
2.
WARNING:
Warns of a potentially hazardous situation which, if not avoided, could result in serious
injury. Warning signs are a yellow triangle with a black border and black symbols. See Label A.
3.
DANGER:
Indicates an imminently hazardous situation which, if not avoided, may result in serious
injury or death. This signal word is limited to the most extreme situations. Always follow the
warnings or instructions that accompany the danger label, such as: High Voltage, Acid, Hot Surface,
etc, etc, etc. See Labels C & CC.
4.
SYMBOL/PICTORIAL:
Conveys a message without words. See labels A & B.
5.
SAFETY ALERT SYMBOL
(an exclamation point inside a triangle)
:
Is a general warning and
indicates a potential personal injury hazard. Follow instructions and read labels and/or product
information before you proceed! See Label A.
Label A
Label B
Label C
General Warning Sign
Hazard Warning Sign
Danger Warning Sign
HIGH VOLTAGE
DISCONNECT POWER
BEFORE OPENING BOX
CAUTION
!
4C002-ME
HIGH SPEED MOVING PARTS.
Do not operate machine unless you are trained,
read and understand the Maintenance/Operator
manual(s).
At start of each shift and after mold
change, check the operation of:
1) Operator gate limit switch(s).
2) Operator gate hydraulic valve.
3) Mechanical platen stop mechanism.
4) Power gate leading edge switch(s) if equipped.
Do not operate machine unless interlocks/
safety devices are in place and function properly.
Failure to follow instructions could result in injury.
DANGER
!
4D001-ME-ISO
HIGH VOLTAGE.
Before servicing turn off, lock
out/tag out main power disconnect.
Do not modify electric or
hydraulic circuits unless
authorized by manufacturer.
Earth ground machine and
electrical cabinet before turning
on power. Failure to comply can
cause shock, burns or death.
Label BB
Label CC
2