Fuel Pickup Kit
2
Note: LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES THAT MAY
NEVER BE USED, OR REGISTERED OR LICENSED FOR HIGHWAY OR OFF-
ROAD USE.
CAUTION:
Installation of this kit should only be performed by persons
knowledgeable in the repair and modification of high performance
automotive fuel systems.
WARNING: Fuel system may be under pressure!
Do not loosen fuel system connections until relieving pressure. Fuel
may leak when loosening fuel system connections. Eliminate potential
fire hazards before loosening any fuel system connections. Always wear
appropriate personal safety equipment such as safety goggles and other
apparel as needed, for protection from debris and sprayed diesel fuel.
Work in a well-ventilated area and keep an approved fire extinguisher
nearby. Extinguish any open flames and eliminate all sources of ignition in
the area of the vehicle before proceeding with the installation.
NOTE:
Before beginning installation, you will need two disconnect tools for
fuel lines. The
BLUE
tool in the figure below corresponds to 3/8” diameter
and is used to remove the return line; the
RED
tool in the figure below
corresponds to 1/2” diameter and is used to remove the fill line. You can
purchase these tools at any auto parts store or Snap-on, Mac or Matco.
GM Fuel Line Disconnect Tool (Matco brand pictured)
