Below, are functions and description of remote controls:
To
k
T
ok Mini
Tango
Gate
command 1
Gate
command 1
Gate
command 2
Gate
command 1
Gate
command 3
Gate
command 2
Gate
command 3
Gate
command 2
PS:
To make the coding of the remote control, call a technician.
Operation
To trigger you operator, press for 1 second, the PPA button of the remote control that comes
with the machine.
If the remote control is triggered while the gate is opening, the operator will stop and will
remain that way until the remote control is triggered again.
When this happens, the gate will be closed.
If the remote control is triggered while the gate is closing, for safety reasons the gate will
stop and automatically open.
Command board
The electronic board allows the installation of other accessories that add functions to the
operator and give more comfort and safety to the user:
PHOTOCELL:
Prevents a person or vehicle are taken by surprise at the gate of the route.
To detect something (obstruction) in the sensor passage line, the photocell (active infrared
sensor) prevents closing or stops the closing movement automatically opening the gate, thus
avoiding collision with people, objects and cars.
GARAGE LIGHT:
Turns the light from the garage where the gate operator is installed, so
that it is triggered for the opening, allowing check for any individual near the residence.
The light goes off only after the complete closure of the gate with adjustable time delay
(this accessory not included).
FLASING LIGHTS:
Alert the pedestrian exit or entry of vehicles at a particular location.
The indicator comes into operation when the gate is triggered to open and off so that it is
fully closed and off (this accessory not included).
CUIDADO
VEÍCULOS
Unlock System
In case of power failure, the machine has an unlocking system to open and close the gate
manually. For this, check below the model of your operator:
PIVO CONDOMINIUM BLDC OPERATOR
1) To operate the gate in manual mode, the key fitting in the hole with the unlocking tongue
facing upwards;
2) Turn the key, moving it down in 180 °, so that the tab is facing downward;
3) To operate again in automatic mode, turn the key in the opposite direction, back it up.
PIVO PISTON AND PIVO PREDIAL OPERATORS
