Poynting A-OMNI-0121-V3 Скачать руководство пользователя страница 11

Version: 1.0

   11 

Safety 

6

• 

If you are installing an antenna for the first 

time or unsure about how to install your 
antenna, obtain the help of a professional 
installer.

•  Carefully survey the installation site before 

installation to locate secure handholds, 
dangerous conditions (such as power 
lines and weak roofs) and the safest and 
most convenient placement for ladders if 
necessary.

•  When installing your antenna, remember:

1.  Do not install near power lines as they 

can electrocute you.

2.  Do not install on a wet or windy day or 

when lightning or thunder is in the area.

3.  Wear shoes with rubber soles and heels 

and protective clothing (long sleeve 
shirt or jacket) and rubber gloves. 

4.  Avoid operating while under the 

influence of drugs, alcohol or 

medication.

5. 

Make sure that any loose fitting jewellery 

or clothing is secured and tie back long 
hair as they can get caught in moving 
parts during installation.

6.  If the antenna assemble starts to fall, get 

away from it and let it fall to avoid harm 
to yourself.

Содержание A-OMNI-0121-V3













Отзывы: