Powrtran ProTabs, Инструкция по установке и эксплуатации

Страница: 13 / 28

TameThe Waves
13
9
10
Make three 7/32”
holes at least 1”
deep to fix the
bracket (G1) and
one 25/64” hole in
the center to allow
the passage of the
power cable.
Insert the upper bracket (G1) on the actuator (A1) by
using the pin (G2), the washer (G4), and the split pin
(G3) supplied. Make sure you have passed the power
cable (1) through the center hole in the bracket.
Insert the power cable into the transom hole. Place
sealant in each of the three screw holes, around the
power cable hole, and on the back side of the bracket.