PowRkraft 65575, Руководство оператора

Страница: 15 / 24

15
REPLACING
HYDRAULIC OIL
Replace the Hydraulic oil in the log
splitter after every 400 hours of use.
Take the following steps to replace it.
●
Make sure all moving parts stop and
the log splitter is unplugged.
●
Unscrew Oil Drain Bolt with Dipstick to
remove it.
●
Turn the log splitter on the Support Leg
side over a 8 liters capacity container
to drain the hydraulic oil off.
●
Turn the log splitter on the motor side.
●
Refill fresh hydraulic oil at the volume
as per the hydraulic oil capacity of a
particular model indicated in above
specifications table.
●
Clean the surface of Dipstick on the
Oil Drain Bolt and put it back into the
oil tank while keeping the log splitter
vertical.
●
Make sure the level of the refilled oil
is just between 2 grooves around the
Dipstick.
●
Clean the Oil Drain Bolt before
threading them back. Make sure they
are tightened to avoid leakage before
placing the log splitter horizontally.
Following hydraulic oils or equivalent are
recommend for the log splitter's hydraulic
transmission system:
SHELL Tellus 22
MOBIL DTE 11
ARAL Vitam GF 22
BP Energol HLP-HM 22
Do not try to knock the
jammed log off. Knocking
a b o u t w i l l d a m a g e t h e
machine or may launch the
log and cause an accident.
65575UK00M111.indd 15 2019/8/30 11:52:44