Technical Specifications
U.S. Standard
Metric
Area per hour . . . . . . . . . . . . . . . . . . . . . . .22,000 sq. feet ......................................................2043 sq. meters
Solution Tank . . . . . . . . . . . . . . . . . . . . . . .10 gallons .............................................................38 liters
Recovery Tank . . . . . . . . . . . . . . . . . . . . . . .10 gallons .............................................................38 liters
Cleaning Width (brush) . . . . . . . . . . . . . . . .20 inches ..............................................................500 mm
Squeegee Width . . . . . . . . . . . . . . . . . . . . . .29
1
⁄
2
inches............................................................750 mm
Brush Pressure . . . . . . . . . . . . . . . . . . . . . .90 lbs. ..................................................................41 kg.
Brush Speed . . . . . . . . . . . . . . . . . . . . . . . .225 RPM
Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . .(1) 20 inches .......................................................(1) 500 mm
Brush Motor (power rating) . . . . . . . . . . . . .24 volts/500 watts
Brush Motor (power rating) . . . . . . . . . . . . .3/4 HP
Vacuum Motor (power rating) . . . . . . . . . . .24 volts/450 watts (Bypass)
Driver Motor (power rating) . . . . . . . . . . . . .24 volts/150 watts (Electronically Controlled)
Supply Voltage (battery) . . . . . . . . . . . . . . . .24 volts
Continuous Operating Run Time . . . . . . . . . .3-4
1
⁄
2
hrs. battery chg.
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . .12 volt, 120 amp min.-190 amp max., 2 required (deep cycle group 27)
Dimensions - Scrubber . . . . . . . . . . . . . . . . .44"L x 20"W x 38"H..............................................1100mmL x 505mmW x 950mmH
Weight w/o batteries . . . . . . . . . . . . . . . . . . .220 lbs. ................................................................100 kg.
Battery storage area . . . . . . . . . . . . . . . . . . .13
3
⁄
4
"L x 13
3
⁄
4
"W x 9"H ...........................................344mmL x 344W x 225mmH
TECHNICAL CHARACTERISTICS
POWR-FLITE
®
PREDATOR™ 20 AUTO SCRUBBER MODEL PAS20
• CAUTION:
Operators must read and understand this manual
completely before operating this equipment.
• CAUTION:
Make sure key switch is in the “OFF” position
before installing pad.
• CAUTION:
Loose objects on the floor can become danger-
ous projectiles if struck by the high-speed pad.
Remove them before operating this machine.
• CAUTION:
Keep hands and feet away from revolving pad.
• CAUTION:
Keep machine moving to prevent damage to
finish or floor.
• CAUTION:
Make sure key switch is turned “OFF” and
battery connector is unplugged from machine
before performing any maintenance procedures.
• CAUTION:
Maintenance and repairs must be performed by
authorized personnel.
• CAUTION:
Battery acid can cause burns. When working on
or around batteries, wear protective clothing and
safety glasses. Remove metal jewelry. Do not lay
tools or metal objects on top of batteries.
• CAUTION:
Do not operate this equipment in bare feet or
with open-toed shoes or sandals.
• CAUTION:
Charging batteries generate explosive gases.
NO SMOKING OR OPEN FLAMES OR SPARKS.
Make sure the charger has turned off before
disconnecting it from the batteries. Charge
batteries in a well-ventilated area with the tanks in
the raised and locked position.
• CAUTION::
Store or park this machine on a level surface
only. Remove key from switch if machine is left
unattended.
• CAUTION::
Do not operate machine or charger in areas
where flammable liquids or gases are present.
Do not use or pick up flammable chemicals or
liquids with this machine.
• CAUTION:
Make sure all caution, warning an instructional
decals are in place and legible. Replace dam-
aged or missing labels.
• CAUTION:
These machines are designed for level floor
operations only.
DO NOT OPERATE
on ramps or
inclines unless adequate personnel are available
for assistance.
• CAUTION:
Do not expose electrical components to water or
other liquids. To clean machine wipe down with
a damp cloth.
IMPORTANT SAFETY INSTRUCTIONS
All operators must read, understand and practice the following safety instructions. They will be repeated occasionally
throughout this manual, and additional cautions may be added for specific cases.
- 1 -
