Slide adjustable clamp into
desired position.
1
Tighten knob to secure hose
ring into place.
3
Insert hose ring bolt into
clamp.
2
Connect the female power
cord receptacle with the
male plugged pigtail
attached at the switch
housing.
4
Attach the solution hose
female connector to the male
connector located on top of
the Powr-Extractor Brush
housing.
6
Push the vacuum hose cuff
into the stainless steel mani-
fold tube inside the middle
of the Powr-Extractor Brush
housing.
5
Push the vacuum hose cuff
onto hose adaptor at
recovery tank
1
Connect the male power
cord plug to the cordset
adaptor and the cordset
adaptor to the Powr-
Extractor Brush receptacle
on extractor.
3
Attach the male solution
connector to the female
connector on the front of
the extractor.
Note: If solution hose male fitting is not
adaptable to your extractor, install
attached female fitting.
2
Powr-Extractor Brush Connections to Extractors
Vacuum Hose/Solution Hose/Power Cord Assembly to PEB
