6
How To Operate The Machine
1. To turn the power on, turn the key switch (22). The power/battery indicator (b)
will light up.
2. Check the battery capacity to see if it is full – all indicators are lit up when
batteries are fully charged.
3. To turn on the brush motor, vacuum motor and the solution flow, press the
switches (c,d,e).
Turn off the brush motor when the brush deck is in the up position.
How to Turn the Vacuum Motor On and Off
1. Push the top half of the right switch (d) down. This turns the vacuum motor on.
2. To turn the vacuum motor off, push the lower half of the right switch (d) down.
How to Lower/Raise the Brush/Pad
1. To raise the brush pad, step down on the Brush Lift Pedal (4) until it locks in place.
2. To lower the brush pad, slightly step on the Brush Lift Pedal (4) to unlock it, and raise it up
slowly.
How to Lower/Raise the Squeegee
1. Pull the handle (3) down to lower the squeegee.
2. Lift the handle (3) up to raise the squeegee.
How to Set the Solution Flow
Adjust the water flow based on the floor conditions. Turn the adjustment knob (11) to control the water flow. Position 1 shows
the closed position. Position 2 shows the maximum water flow position.
Vacuum Motor BrushMotor
Water Flow
