FASTBACK HARDCOVER GUIDE USER’S MANUAL, REV.:C 06/09/05
10
FASTBACK HARDCOVER GUIDE USER’S MANUAL, REV.:C 06/09/05
11
TROUBLESHOOTING
Tighting the Clamp Assembly
In case the purple cover stops become loose they
can be easily retightened using the following method.
Insert a standard screwdriver into the small slot
under the hood of the cover stop, and gently turn
the screwdriver sideways. The hood will pop off
(Fig. 23).
Inside the cover stop, you will see two screws.
With a Phillips screwdriver tighten the screws
carefully (Fig. 24).
CAUTION:
Over-tightening the screws may damage
the Guide. Do not apply more pressure than is
necessary.
H
G
F
E
D
C
B
A
F I G U R E
23
F I G U R E
24
