P
OWERWINCH
915
B
OAT
T
RAILER
W
INCH
7
E
MERGENCY
H
AND
C
RANK
An emergency hand crank is available when there is no power (i.e. a dead battery).
WARNING
N
EVER USE THE HAND CRANK TO ASSIST A RUNNING MOTOR
.
S
ERIOUS PERSONAL INJURY CAN OCCUR
.
1.
Disconnect the power cord from the winch.
2.
Remove the two jamb nuts from the shaft on the left side of the winch.
3. Place the emergency handle onto the
shaft and secure to the shaft with the
one of the nuts removed previously.
Tighten the nut snugly against the
handle.
4. Turn the crank handle clockwise to
wind in the cable.
5. After the boat has been secured
on the trailer, remove the handle
from the shaft. Replace the nuts
on the shaft. It may be necessary
to adjust the brake tension before
using the winch again. Refer to
page 8.
6. Store the handle.
Crank Handle
PW915012
Rotate Handle
Clockwise to
Retract Cable
Jamb
Nuts
