5
X-Slot
Z
USB Module User’s Guide
:
05146515 A
Uncontrolled Copy
I
NSTALLATION
The Universal Serial Bus Module (USB module) is an X-Slot
Z
connectivity device that allows your UPS to communicate with a
USB-compliant computer using LanSafe III power management software.
The following requirements must be met to install the USB module:
:
A computer with a USB port
:
LanSafe III (v4.15 or higher) power management software
:
Microsoft Windows
9
98 or 2000
:
A Powerware
9
UPS with an X-Slot such as the 9125
Inspecting the Equipment
If any equipment has been damaged during shipment, keep the shipping
cartons and packing materials for the carrier or place of purchase and
file a claim for shipping damage. If you discover damage after
acceptance, file a claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with
the carrier within 15 days of receipt of the equipment; 2) Send a copy of
the damage claim within 15 days to your service representative.
Preparation
Before installing the USB module, complete the following list:
1.
The UPS should be installed and operating in Normal mode
(see the UPS User’s Guide for installation instructions).
2.
If LanSafe III/FailSafe III is installed on your PC, uninstall the
software.
NOTE
FailSafe III does not support the X-Slot USB module and must be uninstalled to
prevent installation and compatibility problems.
