Additional modules are designed for use only when inserted inside the host AC surge protector.
1. Remove the cover plate marked “Remove to add module”, by pressing the release mechanism under the unit. Gently remove
the cover plate.
2. Slide module in the bay and press firmly until the module locks into place.
To remove a module, press the release mechanism under the unit and gently pull out the module.
Telephone Line Connections
(with the Telco Protection)
1. Using the supplied patch cable, connect the fax/modem to the jack on the Telephone module labeled OUT.
2. Connect the incoming line (from the wall) to the jack marked IN.
LAN Connections
1. Using the supplied patch cable, connect the computer LAN port to the jack on the LAN module labeled OUT.
2. Connect the incoming line (from the wall) to the jack labeled IN.
CATV Connections
1. Using an appropriate length coax cable (not supplied), connect your TV/VCR/DSS to the connector on the CATV module
labeled OUT.
2. Connect the incoming line (from the wall ) to the connector labeled IN.
Installing Additional Modules
FREE Upgrade Dept.
4300 Fortune Place, Suite A
W. Melbourne, FL 32904
Congratulations! You have just purchased the first ‘Future Proof’ data module.
Whenever you upgrade your network interface, simply slide the module out and mail it to the address below.
Your upgraded module will be immediately shipped to your address.
❑
TEL 2 Wire
❑
ADSL
❑
LAN
❑
TEL 4 Wire
❑
CATV
❑
LL
❑
RS232
❑
T-1
❑
DDS
Module being returned:
Upgrading module to:
❑
LAN
❑
ADSL
❑
CATV
❑
TEL 4 Wire
❑
RS232
❑
LL
❑
DDS
❑
T-1
Mail the module to:
Please keep this card as proof of purchase!
For questions,call the Powerware hotline at:
800-554-3448 (option 4)
