NetSurge is a state-of-the-art modular surge protector, that protects your sensitive
equipment from the most severe electrical environment. NetSurge is available
with or without a telephone module for protecting modems, fax machines, and
other telecommunications equipment. The NetSurge protector can be upgraded at
any time with additional telephone, LAN, or CATV modules.
SAVE THESE INSTRUCTIONS
Important Safety, Grounding, and Installation Instructions
Q
NetSurge is intended for
INDOOR USE ONLY.
Q
NetSurge must be connected to a grounded, three-wire, AC outlet.
Q
Never install telephone or CATV wiring during a lightning storm.
Q
NetSurge should be located away from heat sources, such as heat registers.
Q
Avoid the use of extension cords and adapters.
Installation
1. Plug the equipment to be protected into the NetSurge protector receptacles.
Ensure that the total load does not exceed 15A.
2. Plug the NetSurge protector into a
grounded, three-wire,
AC outlet.
3. Turn on the unit by pressing the large round button once.
4. Verify that the two green indicators are illuminated. See the “Diagnostics”
section if the indicators are not illuminated.
