Powerware 5115 RM, Руководство пользователя

Страница: 56 / 58

Troubleshooting
50
Powerware ® 5115 Rack-Mount User’s Guide
:
164201449 Rev A www.powerware.com
Action Possible Cause Alarm or Condition
Continuous beep.
UPS fan fault. Save your work and turn off your equipment. Turn off
and unplug the UPS. Contact your service
representative. The alarm cannot be silenced.
3 beeps every 10 seconds.
Failed attempt to start the
UPS on battery. Plug the UPS into a power outlet for 24 hours to charge
the battery. After charging the battery, press and hold
the
button for 3 seconds; then check the
indicator. The alarm cannot be silenced.
If the
indicator still flashes, see “UPS
Maintenance” on page 39 to replace the battery.
Continuous beep.
The output wave is
abnormal while the UPS is
on battery. Shutdown is imminent. Save your work and turn off
your equipment. Turn off and unplug the UPS. Contact
your service representative. The alarm cannot be
silenced.
Continuous beep.
The output voltage is below
or above the limit while the
UPS is on battery. Save your work and turn off your equipment. Turn off
and unplug the UPS. Contact your service
representative. The alarm cannot be silenced.