23
Line Mode M
IP1:230.0V/50.0Hz
IP2:230.0V/50.0Hz
IP3:230.0V/50.0Hz
OP1:230.0V/50.0Hz
OP2:230.0V/50.0Hz
OP3:230.0V/50.0Hz
Bat:192.0V/192.0V
Load: 0/ 0/ 0%
→
Turn Off ?
Yes
No
→
Bypass Mode M
IP1:230.0V/50.0Hz
IP2:230.0V/50.0Hz
IP3:230.0V/50.0Hz
OP1:230.0V/50.0Hz
OP2:230.0V/50.0Hz
OP3:230.0V/50.0Hz
Bat:192.0V/192.0V
Load: 0/ 0/ 0%
3-4-3. Operation menu
3-4-3-1. Main menu
Line Mode M
IP1:230.0V/50.0Hz
IP2:230.0V/50.0Hz
IP3:230.0V/50.0Hz
OP1:230.0V/50.0Hz
OP2:230.0V/50.0Hz
OP3:230.0V/50.0Hz
Bat:192.0V/192.0V
Load: 0/ 0/ 0%
→
Control
Measurement
Setting
Information
Events
Main screen(Home page)
Main menu
1)
After pressing the “UP” or “DOWN” button on the main screen (Home page), it will display five items in
operation menu: Control / Measurement / Setting / Information / Events.
2)
Press “UP” or “DOWN” button to select item.
3)
Press “ON/ENTER” button to confirm the selection.
4)
Press “OFF/ESC” button to return back to main scree (Home page).
3-4-3-2. Control
Control:
Bat Test
Turn to Bps
SR Off
Charger Off
Turn On
In “Control” screen, it’s real-time command for UPS.
“Turn On” will be displayed if UPS is not turned on. “Turn Off” will be displayed if UPS is turned on.
“Bat Test” will be displayed if UPS is not in Battery Test Mode. “Cancel Test” will be displayed if UPS is in
Battery Test Mode.
“Turn to Bps” will be displayed all the time no matter what status UPS is. But this action is only effective
when the input power is available.
