PowerWalker VFI 1000CRM LCD, Руководство пользователя

Страница: 9 / 59

6
EN
3. Operations
3-1. Button operation
Button Function
ON/Mute Button

Turn on the UPS: Press and hold ON/Mute button for at least 2 seconds to
turn on the UPS.

Mute the alarm: When the UPS is on battery mode, press and hold this
button for at least 5 seconds to disable or enable the alarm system. But
it
’
s not applied to the situations when warnings or errors occur.

Up key: Press this button to display previous selection in UPS setting
mode.

Switch to UPS self-test mode: Press and hold ON/Mute button for 5
seconds to enter UPS self-testing while in AC mode, ECO mode, or
converter mode.
OFF/Enter Button

Turn off the UPS: Press and hold this button at least 2 seconds to turn off
the UPS. UPS will be in standby mode under power normal or transfer to
Bypass mode if the Bypass enable setting by pressing this button.

Confirm selection key: Press this button to confirm selection in UPS
setting mode.
Select Button

Switch LCD message: Press this button to change the LCD message for
input voltage, input frequency, battery voltage, output voltage and output
frequency. It will return back to default display when pausing for 10
seconds.

Setting mode: Press and hold this button for 5 seconds to enter UPS
setting mode when UPS is in standby mode or bypass mode.

Down key: Press this button to display next selection in UPS setting mode.
ON/Mute + Select
Button

Switch to bypass mode: When the main power is normal, press ON/Mute
and Select buttons simultaneously for 5 seconds. Then UPS will enter to
bypass mode. This action will be ineffective when the input voltage is out
of acceptable range.
3-2. LCD Panel