PowerWalker VFI 10000T LCD, Руководство пользователя

Страница: 28 / 58

25
Input
220 V
60 Hz
Output
220 V
60 Hz
5400 W
273.0 V
100%
The symbol of Warning
Fig. 5-9 Warning
5.2.8 Fault
When the fault occurs, it illustrates that some fatal problems
happened, the UPS would directly cut off the output or transfer to
bypass, and keep alarming. The backlight of LCD would also turn to
red.
The detailed fault table is shown in chapter of 7.
Input
220 V
60 Hz
Output
0 V
0 Hz
0 W
273.0 V
0%
The symbol of Fault
!
Fig. 5-10 Fault
5.2.9 Other status
When the UPS is overload, the alarm will beep twice every second.
Some unnecessary loads should be get rid of one by one to
decrease the loads connected to the UPS less than 90% of its
nominal power capacity.