background image

 

FCC 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can 
radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio 
communications.  However,  there  is  no  guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures: 
— 

Reorient or relocate the receiving antenna. 

— 

Increase the separation between the equipment and receiver. 

— 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

— 

Consult the dealer or an experienced radio/TV technician for help. 

Changes  or  modifications  not  expressly  approved  by  the  party  responsible  for  compliance  could  void  the  user's  authority  to  operate  the 
equipment. 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter. 
This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an  uncontrolled  environment.  End  user  must  follow  the  specific 
operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other 
antenna or transmitter. 
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission 
(USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard 
during product certification for use when properly worn on the body. 
IC 
This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: 
(1) 

This device may not cause interference; and 

(2) 

This device must accept any interference, including interference that may cause undesired operation of the device. 

Cet appareil est conforme aux CNR exempts de licence d'lndustrie Canada. Le fonctionnement est soumis aux deux conditions suivantes: 
(1) 

Ce dispositif ne peut causer des interferences; et 

(2) 

Cet appareil doit accepter toute interference, y compris les interferences qui peuvent causer un mauvais fonctionnement de I'appareil. 

This  equipment  complies  with  ISED  radiation  exposure  limits  set  forth  for  an  uncontrolled  environment.  End  user  must  follow  the  specific 
operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other 
antenna or transmitter. 
The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR 
limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when 
properly worn on the body. 
Cet equipement est conforme aux limites d'exposition aux rayonnements ISED etablies pour un environnement non controle. L'utilisateur final 
doit suivre les instructions specifiques poursatisfaire les normes. Cet emetteur ne doit pas etre co-implante ou fonctionner en conjonction avec 
toute autre antenne ou transmetteur. 
Le dispositif portatif est congu pour repondre aux exigences d'exposition aux ondes radio etablie par le developpement energetique DURABLE. 
Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus elevee signalee en vertu de cette norme 
lors de la certification de produit a utiliser lorsqu'il est correctement porte sur le corps. 

Содержание PowerEgg Series

























Отзывы: