Document Number: RD-WI-004
NO. 18P3N8503AF25T1001
11
D.
Manual White Balance: in Manual White Balance Mode, R and B values can be adjusted
manually, with the adjustable range 0-255;
5.
Exposure
Exposure Modes are listed as below and can be switched via VISCA Command:
A.
Manual Exposure: manually adjusting the aperture, shutter and gain parameters;
B.
Auto Mode: automatic adjustment to the exposure parameters to gain proper image
brightness; factory default;
C.
Aperture Optimizing Mode: the aperture can be adjusted manually, while gain and exposure
time are adjusted automatically;
D.
Exposure Time Priority: the Exposure Time can be adjusted manually, while aperture and
gain are adjusted automatically;
6.
Sharpness
The Sharpness function can enhance the edges of the objects in the image within the range of 0-15
grades;
Adjustments to the image sharpen grade can be made via VISCA Protocol, grade 8 by default;
7.
Noise Reduction
Noise Reduction to effectively remove the noises in the image, with 0-5 grades available;
Adjustments to the noise reduction grade can be made via VISCA Protocol; grade 2 by default;
8.
Gamma
Gamma is used to change the input and output of image to get a better image effect;
With 0-4 grades, grade 0 is default;
9.
Saturation Adjustment
Adjusting the saturation grades of the image;
With 0-15 grades, grade 8 is default;
10.
ICR Modes
ICR Modes have both Manual Mode and Auto Mode available, which can be switched via VISCA
Command;
A.
Manual Mode: manually set the ICR Filter as Infrared or Normal Light; factory default;
B.
Auto Mode: in Auto Exposure Mode, the Module will automatically switch the ICR Filter to
Infrared or Normal Light;
