Safety
READ THE TETRA PRODUCT SAFETY GUIDE SUPPLIED WITH THE
PRODUCT FOR IMPORTANT INFORMATION ABOUT SAFELY
OPERATING THIS PRODUCT.
ALWAYS POWER OFF the mobile radio in environments where RF wireless
devices could potentially cause an explosion. Potentially hazardous areas are
not always signed. Obey all signs and instructions relating to the usage of RF
wireless devices.
ONLY fit an approved accessory. If a non-approved acccessory is fitted, it
may compromise the product safety ratings and may void any product
warranty.
DO NOT attempt to dismantle this product. Servicing and repairs to this
product must be performed by trained service technicians at PowerTrunk
approved service centres.
Important safety notes about the antenna
Only use PowerTrunk approved antennas with this product. PowerTrunk
TETRA radios have been tested and certified for European, FCC and IC safety
and compliance regulations using the following antennas:
Model
Antenna (part no.)
MDT-500-2
9525-800-41021
The use of non-approved antennas may damage the product, will result in
the non-compliance with regulatory requirements, compromise the product
safety ratings, reduce the length of operating time and will invalidate the
product warranty.
NEVER touch the antenna when your radio is transmitting, this may cause a
minor burn to the skin and may affect the operational range of the antenna.
DO NOT handle, hold or swing your radio by its antenna, this may damage
your radio and the antenna.
NEVER use your radio if the antenna shows signs for damage.
4
MDT-500-2 – 01/2017
