Powertronix spa reserves the right to modify this document without notice
Page 27 of 46
R&D – USER MANUAL DT0430-E04
Table 3.2 summarizes the list of available menus.
MENU
N°
NOTES
UPS STATUS AND ALARMS
1
This is default content of the LCD screen. System returns
to this level automatically when no keys are used for 3 min.
MEASUREMENTS
2
Used to display the values of all the measurements
UPS COMMANDS
3
Inverter on / off, static switch, battery test
PANEL SETUP
4
Settings for date / time / battery test / language
EVENTS RECORDER
MANAGEMENT
5
Displays the log of events and related alarms
SERVICE MODE
6
Reserved for technical assistance service
Table 3.2
It is possible to scroll among the listed 6 menu in table 3.2 using the NEXT(>) or BACK(<) keys.
By pressing the NEXT(>) and BACK(<) keys simultaneously, you select ENTER (< >) and by confirming the
selection go to the next menu level.
To return to the previous menu level press the MENU key
Each alarm indication on the display is followed by a sound signal which can be switched off by pressing ESC
(see figure 3.2)
If the operator does not perform any actions for 3 minutes, the “1. UPS STATUS AND ALARMS” menu is automatically
displayed.
