14
Product Storage and Maintenance
1. Full charge the machine before storage.
2. Switch off the all button.
3. If there is any dirt, soak and wring out the cloth to wipe it clean.
4. Please do not use gasoline, volatile oil, thinner, kerosene, etc.
which have the function of dissolving the resin.
5. Keep it in dry and less dusty place. Temperature within
14℉
-
149℉
, avoid direct sunlight.
6. Please full charge the product at least once every three months.
Note
: Please do not keep it long time in the car, trunk,
loading platform or other hot place under direct sunlight. It may
cause the product failure, degradation or thermal problem.
When not in use, please turn off all output, otherwise the
internal circuit is still in power consumption.
When applying inverters, consumers are requested to use
electrical and electronic equipment that is officially certified and
approved.
Troubleshooting
If the product cannot charge or power other devices, please check
according to following steps:
1. Make sure the AC and DC USB buttons are on
.
2. Check the battery capacity, if
it’s lower than 10%, please
recharge the product as soon as possible.
3.
Make sure the load power connected didn’t exceed the limit
power of this product, each port has a limit for the power
connected
.
If you
can’t clear the trouble after above steps, please contact our
after sale service center.