ON SITE SETUP POWERTEK
JACK STAND
Once at your destination the chipper can be uncoupled
from or left attached to the towing vehicle. In either
case, the weight should be transferred from the vehicle
by lowering the jack stand. The wheels should be
blocked front & back as a safety precaution or
machine may move causing damage to property or
bodily harm. (See Fig. 2)
(Fig. 2)
ENGINE
Check the level of engine crankcase oil. If necessary,
add oil following the instructions in the maintenance
section of engine manual.
Check air filters for excessive dirt and oil and clean as
required following the instructions in the maintenance
section of engine manual.
DISCHARGE CHUTE
Loosen the discharge chute clamp and rotate the chute
to the desired position. Then tighten the chute clamp
to lock it into place. (See Fig. 3)
(Fig. 3)
!
!
CAUTION:
!
!
Make sure discharge chute is directed
away from pedestrians, homes, or other
potential safety hazards or injury or
property damage may occur.
7
